LIGATEX Vineyard Tying Tool – Tying Tool Only

• Manual tying tool that automatically ties
• This tool is operated with one hand and without pinching (no more tendinitis risk). Your arm does the work effortlessly.
• One hand remains free to position the cane properly.
• It can be used with either the right or left hand!
• Its automatic operation allows working with gloves.
• The tying is done very quickly in just 3 seconds!
• The movement consists of 3 simple steps: 1 – push 2 – pull 3 – lift. (see photos and demo videos)
• One spool makes 1100 to 1200 galvanized wire ties
• The tie will gradually degrade and break during wood pulling

USAGE TIPS:

It is very important to perform the movements gently. Simply go forward to the stop, backward to the stop (a quick snap, as the wire is cut at the rear stop). It is recommended to work smoothly rather than quickly.
LIGATEX spools have a specific winding. If the wire gets stuck despite careful winding, the tie won’t work. Simply pull 10 cm of wire to get past the blocked area and repeat steps 3 and 4 above (operate the tying tool “empty” to cut the wire and reposition the end properly).
LIGATEX requires no special care, just normal use.
There are no parts that systematically wear out (even the wire cutter shears, it doesn’t cut with an edge!).
Just keep it clean and avoid over-lubrication. The fully exposed mechanism would otherwise collect dirt. Just lightly oil the rubbing parts with sewing machine oil or penetrating oil.
LIGATEX is a comfortable, fast, and economical machine!
Used for several years in all the major vineyards in France and abroad (Germany, Italy, Australia…), the Ligatex tying tool has won over all its users.
More comfortable and faster than separate wire systems; lighter, simpler, as effective and much less expensive than electric systems, LIGATEX is the ideal compromise for tying in the best conditions!
Instructions for installing or changing the spool